Any MEAT Will Become Tender And Juicy If You Cook Like This! GOD, How delicious!

Any MEAT Will Become Tender And Juicy If You Cook Like This! GOD, How delicious!
Share This

Welcome to today’s culinary adventure where we dive into the realm of exquisite meats. Beef, lamb, and pork, these red meats are the epitome of luxury in our kitchen. As an avid meat lover, I believe in making the most of every morsel and minimizing waste. If you’ve ever been perplexed by the myriad cuts of beef, felt uncertain about handling a raw steak, or encountered a disappointingly dry and tough piece of meat on your plate, then you’re in for a treat because today’s lesson is tailored just for you.

The Allure of Meat

Meat has always been a subject of both adoration and criticism, perhaps now more than ever. Despite the surge in vegetarian lifestyles, nearly 95 percent of Americans still relish meat regularly or occasionally. Red meat holds a prominent position as a primary source of protein and occupies a crucial role in various culinary creations. With the continuous rise of low-carb and ketogenic diets that emphasize fats and animal proteins, the demand for quality meat remains steadfast. However, it’s essential to acknowledge that meat production consumes significant resources. Here at Elisticle.com, we strive to approach animal protein consumption with consideration, seeking ways to maximize flavor while using it judiciously and minimizing waste. So, if you aspire to master the art of cooking red meat flawlessly, without any remnants going to waste or experiencing the disappointment of ruining a splendid chop or roast, let’s embark on this journey together.


Start Here: The Basics of Meat

An Anatomy Lesson in 3 Parts

Whether we’re talking about cows, lambs, or pigs, there are three major areas, or cuts, that meat comes from: the shoulders and legs (or shanks), the loin and ribs (or middle area), and the haunches (back thighs and legs). These main cuts break down into smaller cuts — too many and diverse to mention individually — but the area the meat comes from tells you a lot about how to cook it, and how it will taste.

  1. Legs, shoulders, and back legs/haunches tend to be tougher but more flavorful since they’re doing more work and getting more exercise (this will make an even bigger difference on pasture-raised and grass-fed meat).
  2. The loin and ribs tend to be much more tender (filet mignon comes from this area) but usually offer a milder flavor.


Tender Cuts of Meat: Cook Fast!

Tender cuts from the back (loin) region are quick-cooking cuts. These are cuts like ribeye, sirloin, strip steak, pork chops, and tenderloin. These cuts don’t need much cooking to make them taste awesome.

One of the best things you can do with cuts like this is to sear the outside of the meat over high heat, with a cast-iron pan or on a grill, and then continue cooking it just long enough to be safe to eat, but not so long that the proteins begin to seize up and the meat turns tough. This is why most chefs and restaurants tend to recommend steaks medium-rare over well-done.

It used to be believed that searing meat could “seal in the juices,” but that’s not true. (Otherwise, you could cook it however long you want after it was seared and it would stay juicy!) Searing actually creates a chemical change where the protein touches the pan or the fire — essentially caramelizing it. It adds all kinds of complicated flavors to the steak, but the important thing to note is that it makes the meat really, really yummy.

Tougher Cuts of Meat: Cook Slow.

Cuts from the shoulders and rear of the animal (beef chuck, round roast, pork shoulder, and pork butt among them) will taste dry and chewy if you don’t let them cook long enough — usually at least an hour or more. They’re often seared first, then braised or otherwise kept moist in a slow cooker, soup, or stew. The slow cooking might cause the meat to become slightly tougher in the very beginning, but over time the connective tissues break down and the meat becomes tender and delicious.

If You Learn Just One Thing Today …

Any meat that you want to be delicious should be bravely, boldly, nearly recklessly seared, going for broke and riding a ragged edge between browned and burnt. Timid searing and browning is absolutely no good. You want a hit of HEAT on that meat, so be a brave soul and lay it on whether it’s a New York strip steak, chunks of stew meat, a pot roast that’ll braise for hours, or even just ground beef going into a weeknight dinner. To do this, you want to do several things.

  1. Make sure the meat is thoroughly dried. Water will keep the meat from getting hot enough as it touches the pan. If it’s not ground, pat it dry with a paper towel or clean dish towel.
  2. Get the pan hot. Really hot. This doesn’t mean you need the highest flame — medium-high can work — but let the pan sit there for a little while, so it comes all the way up to an unflagging hot temperature.
  3. Lastly, and potentially the trickiest step, let the meat cook totally undisturbed. Once the meat hits the pan, you should hear it sizzle. (If it doesn’t, remove it immediately — the pan is not hot enough.) Once that happens, give it a few minutes for the searing to actually take place (really! Use a clock!), and for the meat to darken and brown. Flip when the meat smells caramelized and dark — this is a place to use your nose. Nudge the meat with a spatula; if it sticks it probably hasn’t developed a good crust yet. When it releases cleanly you’re getting there.

What You Don’t Need to Learn

Boneless top blade? Sirloin chop? Bottom round roast? There are more names for cuts of meat (beef, pork, or lamb) than anyone other than a trained butcher can keep track of. And, confusingly, some cuts go by several names. They’re not worth memorizing. Instead, ask your butcher where on the animal the cut is coming from, and maybe ask for a recommendation on how to cook it.

Failing that, here’s a good rule of thumb: If it’s a smaller, thinner piece or has lots of marbling, cook it quickly on the stove. If it looks big enough to serve a crowd — or if you see lots of tough-looking chewy tissues — plan on roasting, braising, or slow cooking.

Level Up! Meat Cooking Pro Tips

Dry Brining

Dry brining is a simple technique that can lead to ethereal results. Simply rub salt (and any herbs you want to use) into the meat and then place it on a rack (so air can circulate) on the bottom shelf of a fridge for several hours, and up to a day or two. This achieves three important things: The salt draws out juices from the meat, which then reabsorb the (now salty) juice, so the seasoning isn’t just on the surface. The salt also breaks down some of the proteins, tenderizing the meat. And finally, the cool air dries out the surface of the meat — and as we noted above, this helps create a superior sear.

Testing for Doneness

The last thing you want, especially when pan-searing or grilling a steak, is overcooked meat. But some folks are squeamish about undercooked meat and you don’t want to be constantly cutting into a steak to see how pink it is in the middle! What’s a cook to do? You have two options. The first (and frankly, the safest) is to invest in a good meat thermometer. We have a recommendation in our gear guide below, but as long as it’s accurate and easy to read, anyone will do it. The FDA recommends that the internal temperature for any meat besides chicken should be at least 145°F (yes, even for pork). At this temperature, the steak will be done medium-well. A medium-rare steak is only about 125°F internally. Here’s a chart comparing doneness and temperatures. (You don’t have to memorize all the temps — just the ones for your favorite level of doneness.)

But for steak in particular, if you’re somehow without a thermometer, there’s a neat little trick for knowing when the meat is rare, medium-rare, medium-well, or well-done: It’s called the finger test, and it involves pressing on the steak, and comparing the firmness to the fleshy part of your hand under your thumb when your thumb is touching each of the other four fingers on your hand. You can read this explanation or just watch it in the video above.

Slicing and Serving

Finally, when slicing up a steak to serve it (on a salad, for instance) or simply to eat, try noticing the grain of the steak — the direction in which the muscle tissue runs — and then cut perpendicular across the grain, so you’ve got lots of short fibers, and not parallel along the grain. This will help the meat fall apart as you chew, making it taste more tender and less chewy.

Our Favorite Gear

We have recommendations for basic gear on our equipment checklist, but here are a few more tools specifically for vegetables that can save time, and frustration.

  • An instant-read thermometer will help you cook everything from chops to shoulders to the exact temperature you need.
  • If you only have a nonstick skillet, it won’t work well for searing steak. A cast iron pan works best for this kind of cooking.
  • We’ve recommended them before, but tongs are also particularly useful for flipping a steak or chop.
  • A cooling rack that fits into a sheet pan will help dry-brine meats.

Share This

You May Also Like

Avatar photo

About the Author: Jenny Kristy

Spice Seeker, Recipe Weaver, Nomad Chef |With a passport bursting with stamps and a pantry overflowing with global spices, Jenny Kristy isn't just a cook, she's a culinary nomad. Her travels fuel her passion, transforming exotic flavors into recipes that tantalize and transport. She weaves magic in her kitchen, sharing her adventures through meals that whisper of Marrakesh markets and Tuscan trattorias. From teaching sushi to whipping up Moroccan masterpieces, Jenny ignites wanderlust and connects cultures, one delicious bite at a time.

Leave a Reply

Your email address will not be published. Required fields are marked *